Oil mist cleaner

It captures cutting fluid mist generated during CNC machining using centrifugal force and filter technology, and applies a primary chip separator to handle non-water-soluble cutting fluids, etc.

A dust collector capable of filtering incoming fine chips

Request a quote

Catalog

On-site optimization of insoluble cutting fluid usage

It is a dust collector optimized for sites using water-insoluble cutting fluids.

Installed on top of machining equipment such as machining centers, CNC lathes, and milling machines

98% efficiency oil mist collection using centrifugal force and filter technology

OPTION

필터 차압계 장착 타입 YOC F-TYPE	팬 세척 타입 YOC A-TYPE(특허)	필터 재사용 타입 YOC C-TYPE

INSTALLATION CASE


		작업장 대기질 개선 및 직업병 예방
오일미스트로 인한 악영향 제거	작업장 대기질 개선

chip separator

글라스필터

SPECIFICATIONS

MODEL	YOC-300	YOC-350	YOC-400	YOC-420
POWER	3Phase 220V / 380V / 440V (50/60Hz)
Motor(Kw)	0.4	0.75	1.5	2.2
Ampere(A)	1.7/1.0/0.8	3.5/2.0/1.6	6.5/3.7/3.3	8.5/4.9/4.2
RPM	3450
Wind Flow Rate(㎥/min)	7	12	25	30
Static Pressure(mmAq)	90	120	170	180
Noise(dB)	65±2	68±2	70±2	70±2
Collection Rate(%)	99.8%
inlet, Outlet(Ø)	100	125	150	150
Weight(kg)	25	33	55	59
Filter Material	POLYESTER

* 애프터필터 장착시 풍량이 약 8% 정도 감소합니다.

* 위 사양은 60Hz 기준이며, 50Hz 적용시 풍량이 약 20% 감소합니다.

DIMENSIONS

MODEL	A	B	C	D	E	F	G	H	I	J
YOC-300	320	409	180	220	210	240	Ø100	322	800	275
YOC-350	365	454	180	220	210	240	Ø125	370	895	345
YOC-400	452	595	280	320	360	400	Ø150	480	1058	379
YOC-420	452	595	280	320	360	400	Ø150	480	1058	379